 |
|
Fusing supplies, glass working tools and chemicals |
|
Starter kits below may be just what you need to get
started! |
| Fusing Starter Kit |
Everything you need to get started fusing
except the kiln and glass and at a discount. [Glass cutter, breaking pliers,
gloves, safety glasses, fiber paper, kiln wash and more....] |
$90.00
 |
|
Student Glass Pack Assortment |
8 4" x 5" pieces of art glass as follows:
2 black, 2 clear, 1 deep royal blue, 1 red, 1 green, 1 fancy clear
(with frit, stringer or confetti as inventory allows). NOT SCRAP but
pieces cut from sheets. A great assortment of colors to start
with! |
$23.00 |
| New Fuser Complete Kit
We may subsitute the Student Glass Pak Asst for
the art glass scrap if supplies are low on scrap.
|
Folks always ask me how much
it takes to get started and what they need. Finally I got smart and thought
to put it here <smile>.....Everything you need to get started fusing at
home! Includes: Evenheat 360 kiln, Fusing Starter Kit, Student
Glass Pack, 4 ounces of dichroic glass scrap (mixed black and clear),Fusing Book, 2 kiln shelves & 4 Posts.
DOES NOT INCLUDE SHIPPING ON THE KILN (approx. $35 but may vary
depending on Zip code.) Supplies will ship separately from Kiln, additional
shipping will be applied based on your zip code. |
$787.00
|
|
Buy Kilns HERE<click me> |
| Liquid Stringer
|
A thick liquid medium you mix with frit for casting or drawing. 8 ounces
- you mix with frit & water and it goes a long way. |
$36.00
|
| Kiln Shelves |
approx 6" x 6" square shelves (size may vary slightly but will
fit the Paragon SC2, HotBox, QuickFire etc... kilns) |
$7.00
|
| Glass Cutter - Pistol Type
 |
This newer design contains an enclosed fiber wick that holds the
cutter oil so that it doesn't leak out all over your workspace. This is the
only cutter we sell because it is the best one made. Your cutter is one of,
if not THE, most important tools you'll purchase... make it a good one.
Fletcher cutters sport a tungsten carbide wheel which lasts much
longer than less expensive, steel wheels. Plus, each model features a
cutting head that can swivel or remain fixed, depending on the application
and your personal preference. This ability makes it easier to cut
straight edges or curves freehand. Cutting glass takes practice and a
certain 'feel' that you develop the more you cut. The better you cut your
glass before you fire, the less cold work you'll have to do later! I've used
the same cutter for 5 years without replacing the head......and I cut every
single day. |
$32.00
|
| Cutter Oil |
Fill the fiber in the cutter above to 'grease the wheels'! Keeps you
wheel running smoothly. The Fletcher cutter above keeps the oil from leaking
out all over your glass and your work surface. |
$5.00
|
| Breaking Pliers
 |
Rubber covered tips. Used to run a score line or
break off a small piece. A must have in every glass toolkit! |
$12.00
|
 |
Breaker/Grozers - used to clean uneven pieces and break off small bits.
Metal, not rubber, tips like breaking pliers. Essential for circles. |
$8.00
|
| Bead Release - Air Dry |
Used to coat mandrels for making kiln fired or
lampwork beads. You can also use Kiln wash but I prefer Bead Release because
you don't have to muck with getting the exact consistency and it cleans out
of the channel easier and more cleanly. |
$8.50
|
| Bead Reamer Set
 |
Set of 6 drill-bit-like reamers of 3 different
sizes. Used to clean holes in beads. |
$7.00
|
| Haik Brush
 |
For applying kiln wash to shelves |
$8.00
|
| Glass Glue |
Fusible Glue that burns off with no trace or
smudgy look. |
$5.90
|
| Hot Glass Hooks |
Used for combing or raking hot glass. |
$6.00
|
| Specialty Mandrels |
A GO Exclusive Product!
Do you
have a small kiln? Can't find mandrels to use in it? Well, now you can! Our
mandrels are the same quality stainless steel as longer mandrels but will
fit into your smaller kiln (kiln shelves are 4" - 6" square). These mandrels
are 5" long. You no longer have to settle for using fiber paper to make your
bead/pendant channel! |
$6.00 for 10
|
| Shelf Primer |
aka Kiln wash. Mix with water to coat shelves
and/or mandrels. 24 ounces, dry. |
$8.00
|
| Kiln Posts 1" |
You can stack shelves in the kiln with these
posts or feet....you really need 3 or 4 of each size post to level a shelf. |
$2.00
|
| Kiln Posts 2" |
ditto |
$2.00
|
| Kiln Posts 3" |
ditto |
$2.00
|
| Hire Fire Wire |
NiChrome wire you can fuse in place to make bail
in pendants, earrings etc.. very strong after firing. |
$3.75
|
| Terry Gloves |
Protect your hands when removing shelves from
kilns. Not intended for long exposure to heat. Will burn. |
$5.00
|
| Fiber Paper |
Used to make channels in pendants and making molds. We don't recommend
using in place of kiln wash because it leaves a nasty texture on the back of
your pieces. |
$6.00
per square ft. |
| NEW ThinFire Shelf Paper |
Bullseye Thinfire shelf paper. 6 20.5" x 20.5" sheets. This is typically
used in place of kilnwash. |
$19.99
|
| Morton Grid, Small |
This is the white grid I use and recommend. It
has lost of small 1/2" square 'holes' in it that trap the itty bitty slivers
of glass that are created during the cutting process. Without this grid,
those little slivers wind up in your hands..... This is the smaller size
grid and is 14" x 22" |
$14.00
|
| Large Morton Grid |
This is the white grid I use and recommend. It
has lost of small 1/2" square 'holes' in it that trap the itty bitty slivers
of glass that are created during the cutting process. Without this grid,
those little slivers wind up in your hands..... This is the larger size
grid and is 22" x 31" |
$28.00
|
| Portable Glass Studio
 |
This is the contraption that fits onto the
Morton Grid and allows you to cut the same shapes and sizes over and over
again. Not necessary for making one-of-a-kinds but if you want to do
production work or just make your earrings match then this is the thing for
you. I can't live without it. |
$120.00$104.00
|
|
|
